Home :: Boat Trailer Accessories ( #2 ) :: ( #3 ) Post Guide-Ons ( For Boats & Pontoons ) :: Post Guide-Ons, T-945-G; GALVANIZED!! 47" Tall ( 1 PAIR )

Post Guide-Ons, T-945-G; GALVANIZED!! 47" Tall ( 1 PAIR )

Post Guide-Ons, T-945-G; GALVANIZED!! 47" Tall ( 1 PAIR )
Boat Trailer Post Guide-Ons, T-945-G; GALVANIZED, 47 inch Tall model, Photo Boat Trailer Post Guide-Ons, T-945-G; 47 inch Tall model, Drawing Boat Trailer Post Guide-Ons, T-945-G; GALVANIZED, 47 inch Tall model, Image Boat Trailer Post Guide-Ons, T-945-G; GALVANIZED, 47 inch Tall model, ( Close Up ) Clamp Assembly Close-Up Boat Trailer Post Guide-Ons, T-945-G; GALVANIZED, 47 inch Tall model, Drawing T-965; 65" Post Guide-On mounted on Boat Lift/Hoist (1). T-965; 65" Post Guide-On mounted on Boat Lift/Hoist (Close Up)(1). T-965-G; Galvanized 65" Post Guide-On mounted on Boat Lift/Hoist (2). T-965-G; Galvanized 65" Post Guide-On mounted on Boat Lift/Hoist (Close Up)(2). T-965-G; Galvanized 65" Post Guide-On (Customer Photo.)(1). T-965-G; Galvanized 65" Post Guide-On (Customer Photo.)(2). T-965; 65" Post Guide-On (Customer Photo.)(3).

Boat Trailer Post Guide-Ons, T-945-G; "GALVANIZED", 47" Tall model, for SALT WATER USE! 1 PAIR (1 ea. shown)( NOTE: Gold Zink Model shown ).

Post Guides may also be used on boat lifts/hoist, ( NOTE: Pictures on left ). USUALLY the T-965 or T-965-G models are used on boat lifts/hoist because of their height. Preferably mount tube base perpendicular to boats side ( UNLIKE PICTURES ) to achieve full benefit of added tube gusset. But a much better option for boat lifts are our NEW BLG-966; "Boat Lift Post Guides". ( Go to BLG-966 detail page ( CLICK HERE ).

NOW, NOTE WHAT WE DO AND THE OTHERS DONT !!

1) Near full length 1-1/2” sq. steel posts, there is  ONLY 6" Difference between the top of steel tube to top of PVC tube. ( NOT just 1/2 way into PVC Tube. )

2) Welded in brace on formed joint for added strength. ( NOT just formed and able to easily bend when hit by boat. )

3) 1-1/2" SQ. Tubes are 14 Ga. thick material. ( NOT lighter 16 Ga. like others. )

4) The heavy wall 2” SCH. 40 PVC tubes sit on a base ring. ( NOT  jam into the joint. )

5) 5" long, formed clamp mount design. ( NOT just 2 U-Bolts. )

6) HOT DIPPED GALVANIZED finish for added protection against salt water corrosion. HOT DIPPED GALVANIZING has almost 3 times the galvanizing then pre galvanized tube. ( NOT Pre Galvanized tube like most others. )

Also Caps are vented to prevent tube “float”. Height of Post Guide On aids in easier, empty trailer maneuvering, with a large tow vehicle. T-945-G is 47” tall and the inside of the tube extends out to 13” on 3" wide frames and 14" on 2" wide frames from each side of trailer frame. Packaged one pair per carton with all mounting hardware.  Will mount to frames up to 3” wide x 4-1/4” high.

For frames up to 5-1/4" high check option T-7-8 below for longer bolts.

For frames up to 6-1/4" high check option T-8-8 below for longer bolts.

NOTE: When mounting "Guide-On's" on trailers with steps behind the fender, the 2 outside holes may be drilled through the step next to the frame for the mounting bolts to go through to the bottom clamp plate.

NOTE: I-Beam trailers. Our clamps work on I-Beams UP TO 3" WIDE. For I-Beams that are 3-1/2" wide, call 763-427-5330 to have special clamps ( outside holes are slotted to mount to a 3-1/2" wide I-Beam ) packaged instead of standard clamps. PLEASE, ONLY ask for this by phone call, NOT by making a note on order. Also, ONLY ask for this if needed, you DO NOT want the slotted clamps on 3" wide frames. Also, if your I-Beam is WIDER then 3-1/2" you can mount with the standard clamps by drilling holes through the top & bottom inside flange legs of I-Beam to allow the bolts to pass down to the bottom clamp plate, this will NOT hurt the strength of the frame.

Plus $0 per pair shipping

Options: T-7-8; 8 ea. 7" bolts for frames up to 5-1/4" high.

Options: T-8-8; 8 ea. 8" bolts for frames up to 6-1/4" high.

Options: T-945-PC; "Post Guide Pad". To see T-945-PC; "Post Guide Pad / Capped Top End" style ( CLICK HERE ).

Options: Post Guide "Pipe Lights". To See "LED Pipe Light" Model ( CLICK HERE ). 

9%
Details
SKU T-945-G
 
Market price: $137.45
Our price: $124.95
Options
T-7-8: 8ea. 7" bolts for frames up to 5-1/4" high.
T-8-8: 8ea. 8" bolts for frames up to 6-1/4" high.
Quantity
: *
: *
: *
Type the characters you see in the picture:


*

Customers' rating

Sign in to rate

Customer's Reviews

  • Author: Jim Steele
    OK.
  • Author: chad w
    Have 20 ft Skipjack and these guide ons are heavy duty and they take abuse simply put they smoke the comp!!!!!!!!
  • Author: c.a. mcdaniel
    these are excellent quality. hot dipped galvanized and built to last. american made and top of line. wish i had purchased these long time ago. great product.
  • Author: John L
    Thanks for an excellent product! I put the T-945-G Post Guide-Ons on my Shoreland'r trailer with 15 ft Whaler. They fit perfectly and very heavy duty.
  • Author: chad w
    UPDATE 2014= bought these in 2011, now 2014 not a speck of rust after 3 years in saltwater! Glad I bought these rather than CHINA brand- Good job GUYS!
  • Author: John D.
    Great product. Highly recommend. Perfect for waverunner trailer.
  • Author: david m.
    I submitted a few questions on a Sunday morning expecting that I might receive an email in a day or two but not these guys! The owner called that afternoon and provided a lot of useful information and advise. Ordered on Monday morning and had them on Thursday (Cape Cod). Outstanding customer service. Quality is second to none. Small details like guide post stops and reinforced joints are well thought out and appreciated.

Add your review here

: *
: *
Type the characters you see in the picture:


*