Home :: Boat Trailer Accessories ( #2 ) :: ( #3 ) Post Guide-Ons ( For Boats & Pontoons ) :: Post Guide-Ons, T-945; 47" Tall ( 1 PAIR )

Post Guide-Ons, T-945; 47" Tall ( 1 PAIR )

Post Guide-Ons, T-945; 47" Tall ( 1 PAIR )
Boat Trailer Post Guide-Ons, T-945; 47 inch Tall model, Photo Boat Trailer Post Guide-Ons, T-945; 47 inch Tall model, Drawing Boat Trailer Post Guide-Ons, T-945; 47 inch Tall model, Image Boat Trailer Post Guide-Ons, T-945; 47 inch Tall model, ( Close Up ) Clamp Assembly Close-Up Boat Trailer Post Guide-Ons, T-945; 47 inch Tall model, Drawing T-965; 65" Post Guide-On mounted on Boat Lift/Hoist (1). T-965; 65" Post Guide-On mounted on Boat Lift/Hoist (close up)(1). T-965-G; Galvanized 65" Post Guide-On mounted on Boat Lift/Hoist (2). T-965-G; Galvanized 65" Post Guide-On mounted on Boat Lift/Hoist (close up)(2). T-965-G; Galvanized 65" Post Guide-On (Customer Photo.)(1). T-965-G; Galvanized 65" Post Guide-On (Customer Photo.)(2). T-965; 65" Post Guide-On (Customer Photo.)(3).

Boat Trailer Post Guide-Ons, T-945; 47" Tall model, 1 PAIR (1 ea. shown). Gold Zinc Plated finish model, for FRESH WATER USE.  ( Choose T-945-G, for SALT WATER USE! ( CLICK HERE ).

Post Guides may also be used on boat lifts/hoist, ( NOTE: Pictures on left ). USUALLY the T-965 or T-965-G models are used on boat lifts/hoist because of their height. Preferably mount tube base perpendicular to boats side ( UNLIKE PICTURES ) to achieve full benefit of added tube gusset. But a much better option for boat lifts are our NEW BLG-966; "Boat Lift Post Guides". ( Go to BLG-966 detail page ( CLICK HERE ).

NOW, NOTE WHAT WE DO AND THE OTHERS DONT !!

1) Near full length 1-1/2” sq. steel posts, there is  ONLY 6" Difference between the top of steel tube to top of PVC tube. ( NOT just 1/2 way into PVC Tube. )

2) Welded in brace on formed joint for added strength. ( NOT just formed and able to easily bend when hit by boat. )

3) 1-1/2" SQ. Tubes are 14 Ga. thick material. ( NOT lighter 16 Ga. like others. )

4) The heavy wall 2” SCH. 40 PVC tubes sit on a base ring. ( NOT  jam into the joint. )

5) 5" long, formed clamp mount design. ( NOT just 2 U-Bolts. )

Also Caps are vented to prevent tube “float”. Height of Post Guide On aids in easier, empty trailer maneuvering, with a large tow vehicle. T-945 is 47” tall and the inside of the tube extends out to 13” on 3" wide frames and 14" on 2" wide frames from each side of trailer frame. Gold Zinc plated finish for added protection against corrosion. Packaged one pair per carton with all mounting hardware for trailer frames up to 3”W x 4-1/4” high.

For frames up to 5-1/4" high check option T-7-8 below for longer bolts.

For frames up to 6-1/4" high check option T-8-8 below for longer bolts.

NOTE: When mounting "Guide-On's" on trailers with steps behind the fender, the 2 outside holes may be drilled through the step next to the frame for the mounting bolts to go through to the bottom clamp plate.

NOTE: I-Beam trailers. Our clamps work on I-Beams UP TO 3" WIDE. For I-Beams that are 3-1/2" wide, call 763-427-5330 to have special clamps ( outside holes are slotted to mount to a 3-1/2" wide I-Beam ) packaged instead of standard clamps. PLEASE, ONLY ask for this by phone call, NOT by making a note on order. Also, ONLY ask for this if needed, you DO NOT want the slotted clamps on 3" wide frames. Also, if your I-Beam is WIDER then 3-1/2" you can mount with the standard clamps by drilling holes through the top & bottom inside flange legs of I-Beam to allow the bolts to pass down to the bottom clamp plate, this will NOT hurt the strength of the frame.

Plus $0 per pair shipping

Options: T-7-8; 8 ea. 7" bolts for frames up to 5-1/4" high.

Options: T-8-8; 8 ea. 8" bolts for frames up to 6-1/4" high.

Options: T-945-PC; "Post Guide Pad". To see T-945-PC; "Post Guide Pad / Capped Top End" style ( CLICK HERE ).

Options: Post Guide "Pipe Lights". To See "LED Pipe Light" Model ( CLICK HERE ).  

10%
Details
SKU T-945
 
Market price: $127.75
Our price: $114.95
Options
T-7-8: 8ea. 7" bolts for frames up to 5-1/4" high.
T-8-8: 8ea. 8" bolts for frames up to 6-1/4" high.
Quantity
: *
: *
: *
Type the characters you see in the picture:


*

Customers' rating

Sign in to rate

Customer's Reviews

  • Author: Stephen Ruck
    I needed to stabilize the rear end of our boat when loading on the trailer. Your notes of the differences between your product and the competition was what sold me on ordering a set. I didn't need guide posts to see the trailer when backing up, I needed guide posts to guide the boat. We have the Boat2Trailer latch on the front of the trailer to catch the bow eye and it helps to have the trailer farther in the water so I don't have to power up so much. But when I would load the boat the back end would wander in the wind and/or current and the nose wouldn't line up. And I have to tell you folks that your guides are rock solid and hold the boat dead straight, the bunks then catch the v-hull, the boat goes straight and the bow eye catches the latch. As my wife and I are now seniors this is huge. No falling on slippery ramps ever again.
    From now on I am going to hit your site first when searching for a boat part or accessory. You did a great job on the guides.
    Thank you.

Add your review here

: *
: *
Type the characters you see in the picture:


*