Home :: Boat Trailer Accessories ( #2 ) :: ( #2 ) Bunk Guide-Ons :: Bunk Guide-Ons, T-956-18; 5-1/2 ft. long (LESS WOOD)( 1 PAIR )

Bunk Guide-Ons, T-956-18; 5-1/2 ft. long (LESS WOOD)( 1 PAIR )

Bunk Guide-Ons, T-956-18; 5-1/2 ft. long (LESS WOOD)( 1 PAIR )
Bunk Guide-Ons, T-956-18; 5-1/2 ft. long (Bunk Guide less wood), Photo Bunk Guide-Ons, T-956; 5-1/2 ft. long, Drawing Bunk Guide-Ons, T-956-18; 5-1/2 ft. long (Bunk Guide less wood) ( Close Up ) Bunk Guide-Ons, T-956-18; 5-1/2 ft. long (Bunk Guide less wood) ( Close Up ) Clamp Assembly Close-Up Bunk Guide-Ons, T-956-18; 5-1/2 ft. long (Bunk Guide less wood), Drawing

The T-956-18; is 1 pair (1ea. shown) 5-1/2' bunk "Guide-Ons" and is the same as the T-956, except it is LESS WOOD. It  COMES with the carpet for 2 ea. 6' long 2" x 4" boards, but you buy your own wood and staple the carpet to it. ( You SAVE $45.00 ) by doing this, compared to a standard T-956. Inside of bunks extend out to 13" on 3" wide frames and 14" on 2" wide frames, from each side of trailer frame on 1-1/2” Sq. x 14 Ga. (.083) thick steel tube bunk arms, and has height adjustment of 19” to 25”. When the tubes are mounted at the widest point on 6 Ft. bunks, the maximum width between the clamps is 59". Gold Zinc Plated finish for added protection against corrosion. Packaged in pairs with all mounting hardware for trailer frames up to 3” W. x 4-1/4” H.  

"HOT DIPPED GALVANIZED FINISH", NOW AVAILABLE !! Choose "GALVANIZED FINISH" option below.

NOTE: To upgrade to carpet that covers 2 ea. 2" x 6" x 6' long boards check option UP-1575 below.

For frames up to 5-1/4" high check option T-7-16 below for longer bolts.

For frames up to 6-1/4" high check option T-8-16 below for longer bolts.

NOTE: When mounting "Guide-On's" on trailers with steps behind the fender, the 2 outside holes may be drilled through the step next to the frame for the mounting bolts to go through to the bottom clamp plate.

NOTE: I-Beam trailers. Our clamps work on I-Beams UP TO 3" WIDE. For I-Beams that are 3-1/2" wide, call 763-427-5330 to have special clamps ( outside holes are slotted to mount to a 3-1/2" wide I-Beam ) packaged instead of standard clamps. PLEASE, ONLY ask for this by phone call, NOT by making a note on order. Also, ONLY ask for this if needed, you DO NOT want the slotted clamps on 3" wide frames. Also, if your I-Beam is WIDER then 3-1/2" you can mount with the standard clamps by drilling holes through the top & bottom inside flange legs of I-Beam to allow the bolts to pass down to the bottom clamp plate, this will NOT hurt the strength of the frame.

Plus $0 per pair shipping

( This HEAVY / OVERSIZED Item incurs a additional shipping charge ALREADY included in shipping cost. )

Options: T-7-16; 16 ea. 7" bolts for frames up to 5-1/4" high.

Options: T-8-16; 16 ea. 8" bolts for frames up to 6-1/4" high.

1%
Details
SKU T-956-18
 
Market price: $177.45
Our price: $174.95
Options
T-956-18-G; "GALVANIZED FINISH".
UP-1575; Carpet for 2 ea. 6' x 2" x 6" boards
T-7-16; 16 ea. 7" bolts for frames up to 5-1/4" high.
T-8-16; 16 ea. 8" bolts for frames up to 6-1/4" high.
Quantity
: *
: *
: *
Type the characters you see in the picture:


*

Customers' rating

Sign in to rate

Customer's Reviews

There have been no reviews for this product.

Add your review here

: *
: *
Type the characters you see in the picture:


*