- per page
NOTE:!! D-630; MUST ORDER MINIMUM OF 2 EA. FOR ORDER TO PROCEED. SORRY, BUT NEW SHIPPING COST ON THIS OVERLENGTH ITEM PUSHED US TO IMPLEMENT THIS NEW MINIMUM ORDER POLICY.!!
D-630; "Dock Stabilizer Kit" for 3 ft. (36”) to 4 ft. (48”) wide docks with 1-1/4" dock pipe ( 1-5/8" O.D.). Stabilizer bar helps to reduce a docks side to side racking/swaying. U-shaped design mounting brackets allow brackets to be mounted on dock pipes already fastened to dock. ( DOES NOT need to be slid over from the top of the pipe ).
Includes: 1ea. 53" Brace Bar, 2ea. End Mount Brackets & Fasteners.
( CLICK ON DETAILS FOR DETAILED PRODUCT DESCRIPTION and MORE PICTURES )
NOTE:!! D-630-80; MUST ORDER MINIMUM OF 2 EA. FOR ORDER TO PROCEED. SORRY, BUT NEW SHIPPING COST ON THIS OVERLENGTH ITEM PUSHED US TO IMPLEMENT THIS NEW MINIMUM ORDER POLICY.!!
D-630-80; "Dock Stabilizer Kit" NOTE: This is NOT for 4' wide docks!! It is for docks WIDER then 4 ft. & up to 6 ft. (72”) wide, with 1-1/4" dock pipe ( 1-5/8" O.D.). Stabilizer bar helps to reduce a docks side to side racking/swaying. U-shaped design mounting brackets allow brackets to be mounted on dock pipes already fastened to dock. ( DOES NOT need to be slid over from the top of the pipe ).
Includes: 1ea. 80" Brace Bar, 2ea. End Mount Brackets & Fasteners.
( CLICK ON DETAILS FOR DETAILED PRODUCT DISCRIPTION and MORE PICTURES )
D-630-40; "Dock Stabilizer Kit" for docks with 1-1/4" dock pipe ( 1-5/8" O.D.). Side stabilizer bar helps to reduce a docks front to back racking/swaying. U-shaped design pipe mounting bracket allow bracket to be mounted on dock pipes already fastened to dock. ( NOTE: Angle brace shown on outside to better show angle, NORMALLY mounted to inside ).
Includes: 1ea. 40" Brace Bar, 1ea. Pipe Mount Bracket & 2 ea. Dock Mounting Bars, w/ All Fasteners.
( CLICK ON DETAILS FOR DETAILED PRODUCT DESCRIPTION and MORE PICTURES )
"Base Pad" has a 12” square base and adjustable sleeve to mount 1-1/4" Pipe. ( 1/2" adjustment bolt included ). Hole in center of pad allows pipe to go through for extra dock support if desired. Usually used 2 ea. per dock section.
( CLICK ON DETAILS FOR DETAILED PRODUCT DISCRIPTION AND PIPE CAPS )
Use "Dock Pipe Wrench" to screw in & out dock pipe with "Pipe Augers" mounted to them from lake/river bottom, or in some cases, to pull out dock pipe W/out Augers.
NOTE: "Auger Wrench" works on 1-1/4", 1-1/2" & 2" Dock Pipe.
( CLICK ON DETAILS FOR DETAILED PRODUCT DISCRIPTION )
THIS ITEM IS OUT OF STOCK.
,"Pipe Driving Cap" helps protect top of pipe when driving pipe into lake bottom. Cap fits over 1-1/4" Pipe (1-5/8" O.D.), 1-1/2" Pipe (1-7/8" O.D.) & 2" Pipe (2-3/8" O.D.). Hole provided to tie optional retrieving rope and place other end over pipe. NOTE: THIS ITEM SUBECT TO $14.50 MINIMUM SHIPPING CHARGE. IF TOTAL ORDER SHIPPING CHARGES DO NOT ACHIEVE MINUMUM.
( CLICK ON DETAILS FOR DETAILED PRODUCT DISCRIPTION )
The "Inside Corner Bracket" has a angle iron dock mount with adjustable sleeve for fastening 1-1/4" dock pipe to dock sections. Used in corners for dual section support or inside (underneath dock) of outside corners to make outside of dock free of dock support pipes.
( CLICK ON DETAILS FOR DETAILED PRODUCT DISCRIPTION; PIPE CAPS AND FASTENERS )
The "Left Outside Corner Bracket" has a 90 degree formed angle iron dock mount ( ties end corner together giving added support ) with adjustable sleeve for fastening 1-1/4" dock pipe to dock section.
( CLICK ON DETAILS FOR DETAILED PRODUCT DISCRIPTION; PIPE CAPS AND FASTENERS )
The "Right Outside Corner Bracket" has a 90 degree formed angle iron dock mount ( ties end corner together giving added support ) with adjustable sleeve for fastening 1-1/4" dock pipe to dock section.
( CLICK ON DETAILS FOR DETAILED PRODUCT DISCRIPTION; PIPE CAPS AND FASTENERS )
The D-562; "Rectangular Backing Plate" can be used with the D-570, D-575, D-580 & D-585, "O.S. Corner Brackets" as a back up plate on inside of dock section or the D-576 & D-586; "I.S. Corn. Brkts. on the outside of dock to add more bracket mounting support.
( CLICK ON DETAILS FOR DETAILED PRODUCT DISCRIPTION )
The D-562; "Rectangular Backing Plate" can be used with the D-550-L, D-555-L & D-556-L "Straight Brkt., Section Connectors" as a back up plate on inside of dock section to add more bracket mounting support ( 2 ea. per bracket ).
( CLICK ON DETAILS FOR DETAILED PRODUCT DISCRIPTION )
"Rectangular Backing Plate" can be used with the D-550 & D-555; "Straight Brackets" or the D-450 & D-452; "Floating Straight Brackets" as a back up plate on inside of dock section to add more bracket mounting support.
NOTE: NOT for D-550-L, D-555-L or D-556-L. USE D-562; "Rect. Backing Plate" for them!!
( CLICK ON DETAILS FOR DETAILED PRODUCT DISCRIPTION )
The "Straight Bracket" has a angle iron dock mount with an adj. sleeve for fastening 1-1/4" dock pipe to side of dock section. Usually used 2 ea. per dock section. ( 1/2" adjustment bolt included ).
( CLICK DETAILS FOR DETAILED PRODUCT DISC., PIPE CAPS AND FASTENERS )
The "Straight Brkt. / Section Conn." has a angle iron dock mount with adj. sleeve for fastening 1-1/4" pipe to dock. Usually used 2 ea. per connection joint for dock support and connecting dock sections together ( 1/2" adj. bolt included ).
( CLICK DETAILS FOR DETAILED PRODUCT INFO. )
- per page
