- per page
"Section Tie Plates" are used to connect 2 ea. dock sections together. Use 2 ea. PER SIDE if sections are open ended, use 1 ea. with 2 ea. D3-435; "Inside Corner Supports" or 2 ea. D3-442; "Square Backing Plates" PER SIDE if secton ends are closed.
( CLICK ON DETAILS FOR DETAILED PRODUCT DISCRIPTION AND FASTENERS )
"Dock Ramp Hinge Kit" is used for the first dock section ( RAMP ) when the shore level is higher or lower than the main dock or when useing a ramp to transition from one dock level to another. Kit includes 4 ea. Hinge Plates & 2 ea. Hinge Bolts W/ Nuts.
( CLICK ON DETAILS FOR DETAILED PRODUCT DISCRIPTION; PIPE CAPS AND FASTENERS )
"Cement Anchor Cleats" are cemented into a 5 gallon pail or any cement form to make an anchor used to attach to and stabilize Floating Docks that do not have guide pipes. Price is for 4 ea. pc's.
( CLICK ON DETAILS FOR DETAILED PRODUCT DISCRIPTION )
"Chain Retainer" bolts to side of dock to fasten / mount chain that is connected at other end to a submerged weight that holds dock in place.
( CLICK ON DETAILS FOR DETAILED PRODUCT DISCRIPTION; PIPE CAPS AND FASTENERS )
"Floating Straight Bracket", W/ Pipe Sleeve works with dock pipe UP TO 2" ( 2-3/8" O.D. ) to stabilize floating docks or use bracket as a tie off for anchoring floating docks or swim rafts.
( CLICK ON DETAILS FOR DETAILED PRODUCT DISCRIPTION; PIPE CAPS AND FASTENERS )
D3-464; "Hitch Pin & Hitch Clip" ( 1 of Each). The Hitch Pin is 5/8" Dia. & the Hitch Clip is ( .148" Diam. Material ). These items are used on our D3-420 & D3-430 "Floating Dock, Section Connectors" also on the D3-486; "Corner Support Bar Assembly".
NOTE: Cost is for one of each item.
"Dock Ramp Roller Assembly" is used on end of Hinged Ramps to allow end of dock ramp to roll on other dock section or shore when Floating Dock height changes.
( CLICK ON DETAILS FOR DETAILED PRODUCT DISCRIPTION; PIPE CAPS AND FASTENERS )
"Floating Straight Bracket", W/ Ring Sleeve works with dock pipe UP TO 2" ( 2-3/8" O.D. ) to stabilize floating docks or use bracket as a tie off for anchoring floating docks or swim rafts.
( CLICK ON DETAILS FOR DETAILED PRODUCT DISCRIPTION; PIPE CAPS AND FASTENERS )
"Backup Washer Bar" can be used with the D3-444 "Stringer Angle Bracket" or the D3-459; "Dock Ramp Roller Assembly".
( CLICK ON DETAILS FOR DETAILED PRODUCT DISCRIPTION; PIPE CAPS AND FASTENERS )
"Stringer Angle Bracket" is used for inside dock section stringers.
( CLICK ON DETAILS FOR DETAILED PRODUCT DISCRIPTION; PIPE CAPS AND FASTENERS )
"Square Backing Plate" can be used with the D3-420 "T-Section Connectors" & most other D3-400 series brackets as a back up plate on inside of dock section for added bracket support.
( CLICK ON DETAILS FOR DETAILED PRODUCT DISCRIPTION; PIPE CAPS AND FASTENERS )
"Outside Corner Angle Tie", W/ Pipe Sleeve works with dock pipe UP TO 2" ( 2-3/8" O.D. ) to Tie corner of dock end section together & stabilize a floating end section.
( CLICK ON DETAILS FOR DETAILED PRODUCT DISCRIPTION; PIPE CAPS AND FASTENERS )
- per page