Smooth Wobble Roller - Designed to adjust automatically to the contours of the boat hull. It is 4 1/4" Wide X 4-1/4” O.D. X 7/8" I.D. Roller comes with 3/4" washer & 5/32" dia. x 1" cotter pin.
NOTE: There is a Large 3/16 thick, Steel Washer, molded into the roller that gives it the self adjusting action.
Plus $2.00 ea. shipping. NOTE: A $14.50 minimum shipping charge will be applied depending on shipping total on ordered products.
The W-221-R; 5" Keel Roller, 5"W. x 3"O.D. x 5/8"I.D. ( "V" Style ) is designed especially to handle the keel of meadium size boats. Made of Thermal PVC plastic w/ a built in sleeve/bushing for easier rolling.
Winch Cable - 3/16” diameter, twisted, galvanized steel cable, equipped with heavy duty malleable iron snap hook. Thimble in the eye protects cable from abrasion and wear. Has very little stretch or elasticity. Maximum working load is 2800 pounds. Cable is 30 feet in length.
NOTE: TO VIEW PHOTO ENLARGEMENT AND MORE PRODUCT INFORMATION, CLICK ON IMAGE OR DETAILS.
( 2 EA. ) Replacement "Rollers" (ONLY). 1/2: I.D. X 2-1/4" O.D. small replacement roller for bunk systems.
The WD-55-16; "Dock wheel Axle mounts" ( SOLD & PRICED AS 1 PAIR ). Axle mounts are made of 2" x 154 w. Pipe and have 1/2"-13; Hex nuts welded to them for the 1/2"-13 x 1-1/2" set bolts. Complete with 4 ea. cotter pins & washers for 1-1/2" pipe.
NOTE: Axle mounts are ideally for 1-1/2" Pipe ( 1-7/8" O.D. ), but will work on 1-1/4" Pipe ( 1-5/8" O.D. ).
The WD-55; "Dock Wheel Mounting Kit" provides Brkt's, Brace bars & Hrdw. to install dock wheels to your Dock. Kit is desiged ideally for 1-1/2" Pipe ( 1-7/8" O.D. ) uprights & Axle. NOTE: Dock wheels and pipe not included in kit.
CLICK ON DETAILS ( under Picture ) for more pictures & Info!
TheWD-75-1; Winch Mount Pipe is used on the WD-76 & WD-75; Dock Leveling Kits. Mount Tube is made of 2" x 11-3/4" long Pipe and will mount over pipe up to 1-1/2" Pipe ( That is 1-7/8" O.D. ). If mounting on 2" pipe ( That is 2-3/8" O.D. ) You will need to purchase the WD-76-12; 2" Pipe Mount Adaptor. Part is silver zinc plated for corrosion protection.
TheWD-76-1; "J"-Hook is used on the WD-76; Dock Leveling Kit. Hook is made of 1/4" thick x 2" wide material & wide enough to hook on a 2" wide board. There is a 3/8" hole on long leg to attach cable or rope.
WD-76; Dock Winch Leveling Kit. Complete w/ Winch, Winch Mount Tube, Cable & Hook. Winch Mount tube slides over existing 1-1/4" ( 1-5/8" O.D. ) & 1-1/2" ( 1-7/8" O.D. ) Dock Pipe. Dock section hook ( J-Hook ) will work on dock frames up to 2" wide.
NOTE: Optional, WD-76-12; "2 inch Pipe mount piece" available for 2" ( 2-3/8" O.D. ) Dock Pipe.
CLICK ON DETAILS ( under Picture ) for more pictures & Info!
Boat Trailer Wobble Roller Assembly, T-980; Standard 28” Assemblies, 1 PAIR ( 1 ea. shown ). Includes 8 wobble rollers per pair, and are sold & priced per pair.
NOTE: NEW, STRAIGHT, LOW PROFILE, "WOBBLE ROLLER SHAFT ASSEMBLIES". THESE REPLACE THE FORMED ROLLER SHAFTS SHOWN IN PICTURED WOBBLE ROLLER ASSEMBLIES.
"HOT DIPPED GALVANIZED FINISH" available ( mainly for SALT WATER !! ), Click on "DETAILS" for option.
Boat Trailer Wobble Roller Assembly, T-982; Single Pair Assemblies, 1 PAIR ( 1 ea. shown ). Includes 4 wobble rollers per pair, and are sold & priced per pair.
NOTE: NEW, STRAIGHT, LOW PROFILE, "WOBBLE ROLLER SHAFT ASSEMBLIES". THESE REPLACE THE FORMED ROLLER SHAFTS SHOWN IN PICTURED WOBBLE ROLLER ASSEMBLIES.
"HOT DIPPED GALVANIZED FINISH" available ( mainly for SALT WATER !! ), Click on "DETAILS" for option.
Boat Trailer Wobble Roller Assembly, T-988; Heavy Duty Assemblies, 1 PAIR ( 1 ea. shown ). 16 ea. wobble rollers per pair ( 8 ea. per 28" long tube ) for greater hull support. Sold & priced per pair.
NOTE: NEW, STRAIGHT, LOW PROFILE, "WOBBLE ROLLER SHAFT ASSEMBLIES". THESE REPLACE THE FORMED ROLLER SHAFTS SHOWN IN PICTURED WOBBLE ROLLER ASSEMBLIES.
"HOT DIPPED GALVANIZED FINISH" available ( mainly for SALT WATER !! ), Click on "DETAILS" for option.
Boat Trailer Wobble Roller Assembly, T-989-G; Extra Heavy Duty Assemblies, 1 PAIR ( 1 ea. shown ). 24 ea. wobble rollers per pair ( 12 ea. per 40" long tube ) for greater hull support & weight distribution. Sold & priced per pair.
NOTE: NEW, STRAIGHT, LOW PROFILE, "WOBBLE ROLLER SHAFT ASSEMBLIES". THESE REPLACE THE FORMED ROLLER SHAFTS SHOWN IN PICTURED WOBBLE ROLLER ASSEMBLIES.
SOLD IN PAIRS. STANDARD FINISH IS "HOT DIPPED GALVANIZED"
Click on "DETAILS" for more product Information & pictures.
