Previous page"Inside Corner Angle Tie", W/ Pipe Sleeve works with dock pipe UP TO 2" ( 2-3/8" O.D. ) to Tie inside corner of 2 dock sections together & stabilize inside corner of both sections. Same parts as D-441; "Outside Corner Angle Tie" ( Shown Above ), but Pipe Sleve is welded to the inside of the formed corner piece.
( CLICK ON DETAILS FOR DETAILED PRODUCT DISCRIPTION; PIPE CAPS AND FASTENERS )
THIS ITEM IS OUT OF STOCK.
,"Outside Corner Angle Tie" can be used with D3-435 "Inside Corner Support" or when a float is in the way the D3-442; Square Backing Plate" may be used.
( CLICK ON DETAILS FOR DETAILED PRODUCT DESCRIPTION; PIPE CAPS AND FASTENERS )
"Outside Corner Angle Tie", W/ Pipe Sleeve works with dock pipe UP TO 2" ( 2-3/8" O.D. ) to Tie corner of dock end section together & stabilize a floating end section.
( CLICK ON DETAILS FOR DETAILED PRODUCT DISCRIPTION; PIPE CAPS AND FASTENERS )
"Square Backing Plate" can be used with the D3-420 "T-Section Connectors" & most other D3-400 series brackets as a back up plate on inside of dock section for added bracket support.
( CLICK ON DETAILS FOR DETAILED PRODUCT DISCRIPTION; PIPE CAPS AND FASTENERS )
"Stringer Angle Bracket" is used for inside dock section stringers.
( CLICK ON DETAILS FOR DETAILED PRODUCT DISCRIPTION; PIPE CAPS AND FASTENERS )
"Backup Washer Bar" can be used with the D3-444 "Stringer Angle Bracket" or the D3-459; "Dock Ramp Roller Assembly".
( CLICK ON DETAILS FOR DETAILED PRODUCT DISCRIPTION; PIPE CAPS AND FASTENERS )
"Floating Straight Bracket", W/ Ring Sleeve works with dock pipe UP TO 2" ( 2-3/8" O.D. ) to stabilize floating docks or use bracket as a tie off for anchoring floating docks or swim rafts.
( CLICK ON DETAILS FOR DETAILED PRODUCT DESCRIPTION; PIPE CAPS AND FASTENERS )
"Dock Ramp Roller Assembly" is used on end of Hinged Ramps to allow end of dock ramp to roll on other dock section or shore when Floating Dock height changes.
( CLICK ON DETAILS FOR DETAILED PRODUCT DISCRIPTION; PIPE CAPS AND FASTENERS )
D3-464; "Hitch Pin & Hitch Clip" ( 1 of Each). The Hitch Pin is 5/8" Dia. & the Hitch Clip is ( .148" Diam. Material ). These items are used on our D3-420 & D3-430 "Floating Dock, Section Connectors" also on the D3-486; "Corner Support Bar Assembly".
NOTE: The Hitch pin diameter is 5/8", if not used on a VE-VE Inc. manufactured floating dock bracket, make sure what you are replacing is 5/8" diameter. Other manufactures hitch pins may be smaller ( 1/2" diameter ) or larger ( 3/4" diameter ). ALSO, the effective length ( distance from form to inside of hole ) is 2-1/2" !!
"Floating Straight Bracket", W/ Pipe Sleeve works with dock pipe UP TO 2" ( 2-3/8" O.D. ) to stabilize floating docks or use bracket as a tie off for anchoring floating docks or swim rafts.
( CLICK ON DETAILS FOR DETAILED PRODUCT DISCRIPTION; PIPE CAPS AND FASTENERS )
THIS ITEM IS CURRENTLY OUT OF STOCK, ANOTHER PRODUCTION RUN IS AT THE GALVANIZERS, SO STILL TAKING ORDERS!! SORRY!! PROJECTED SHIP DATE IS 11/20-30/23, YOUR PATIENCE WILL BE REWARDED W/ A QUALITY AMERICAN MADE PRODUCT!!
"Chain Retainer" bolts to side of dock to fasten / mount chain that is connected at other end to a submerged weight that holds dock in place.
( CLICK ON DETAILS FOR DETAILED PRODUCT DISCRIPTION; PIPE CAPS AND FASTENERS )
"Cement Anchor Cleats" are cemented into a 5 gallon pail or any cement form to make an anchor used to attach to and stabilize Floating Docks that do not have guide pipes. Price is for 4 ea. pc's.
( CLICK ON DETAILS FOR DETAILED PRODUCT DISCRIPTION )
THIS ITEM IS OUT OF STOCK.
,The D3-480-1A; "Dock Ramp Hinge Kit" for L-Layout Ramp, is used when the Dock Ramp ( or Hinged Section ) is narrower then the section it is mounted to, but will be mounted even on the right or left side of the adjoining section ( Thus making a L-Layout ). Ramp Kit comes w/ 3 ea. Straight plates & 1 ea. Formed plate, hinge bolts with nuts.
( CLICK ON DETAILS FOR DETAILED PRODUCT DISCRIPTION; PIPE CAPS AND FASTENERS )
THIS ITEM IS OUT OF STOCK.
,The D3-480-2A; "Dock Ramp Hinge Kit" for T-Layout Ramp, is used when the Dock Ramp ( or Hinged Section ) is narrower then the section it is mounted to & will NOT be mounted even on the right or left side of the adjoining section ( Thus making a T-layout ). Ramp Kit comes w/ 2 ea. Straight plates & 2 ea. Formed plates, hinge bolts with nuts.
( CLICK ON DETAILS FOR DETAILED PRODUCT DISCRIPTION; PIPE CAPS AND FASTENERS )
