The "Right Outside Corner Bracket" has a 90 degree formed angle iron dock mount ( ties end corner together giving added support ) with adjustable sleeve for fastening 1-1/4" dock pipe to dock section.
( CLICK ON DETAILS FOR DETAILED PRODUCT DISCRIPTION; PIPE CAPS AND FASTENERS )
The D-584; Positive Lock "Mooring Arm" has 18” long arms that hook to the side of small fishing boats to secure them in position. Sold in pairs.
The "Left Outside Corner Bracket" has a 90 degree formed angle iron dock mount ( ties end corner together giving added support ) with adjustable sleeve for fastening 1-1/4" dock pipe to dock section.
( CLICK ON DETAILS FOR DETAILED PRODUCT DISCRIPTION; PIPE CAPS AND FASTENERS )
The "Inside Corner Bracket" has a angle iron dock mount with adjustable sleeve for fastening 1-1/4" dock pipe to dock sections. Used in corners for dual section support or inside (underneath dock) of outside corners to make outside of dock free of dock support pipes.
( CLICK ON DETAILS FOR DETAILED PRODUCT DISCRIPTION; PIPE CAPS AND FASTENERS )
THIS ITEM IS OUT OF STOCK.
,"Pipe Driving Cap" helps protect top of pipe when driving pipe into lake bottom. Cap fits over 1-1/4" Pipe (1-5/8" O.D.), 1-1/2" Pipe (1-7/8" O.D.) & 2" Pipe (2-3/8" O.D.). Hole provided to tie optional retrieving rope and place other end over pipe. NOTE: THIS ITEM SUBECT TO $14.50 MINIMUM SHIPPING CHARGE. IF TOTAL ORDER SHIPPING CHARGES DO NOT ACHIEVE MINUMUM.
( CLICK ON DETAILS FOR DETAILED PRODUCT DISCRIPTION )
THIS ITEM IS OUT OF STOCK !!!!
,D-594-2; Pipe Puller "JAW ONLY"
The D-594; Dock Pipe Puller / Remover is used to pull out dock anchoring pipe from the lake / river bottom. Puller Jaw works on (1-1/4" (1-5/8" O.D.)), (1-1/2" (1-7/8" O.D.)) & (2" (2-3/8" O.D.)) Dock Pipes.
( CLICK ON DETAILS FOR DETAILED PRODUCT DISCRIPTION )
Use "Dock Pipe Wrench" to screw in & out dock pipe with "Pipe Augers" mounted to them from lake/river bottom, or in some cases, to pull out dock pipe W/out Augers.
NOTE: "Auger Wrench" works on 1-1/4", 1-1/2" & 2" Dock Pipe.
( CLICK ON DETAILS FOR DETAILED PRODUCT DISCRIPTION )
"Base Pad" has a 12” square base and adjustable sleeve to mount 1-1/4" Pipe. ( 1/2" adjustment bolt included ). Hole in center of pad allows pipe to go through for extra dock support if desired. Usually used 2 ea. per dock section.
( CLICK ON DETAILS FOR DETAILED PRODUCT DISCRIPTION AND PIPE CAPS )
"Base Pad" has a 12” square base and adjustable sleeve to mount 1-1/2" Pipe. ( 1/2" adjustment bolt included ). Hole in center of pad allows pipe to go through for extra dock support if desired. Usually used 2 ea. per dock section.
( CLICK ON DETAILS FOR DETAILED PRODUCT DISCRIPTION AND PIPE CAPS )
D-630-40; "Dock Stabilizer Kit" for docks with 1-1/4" dock pipe ( 1-5/8" O.D.). Side stabilizer bar helps to reduce a docks front to back racking/swaying. U-shaped design pipe mounting bracket allow bracket to be mounted on dock pipes already fastened to dock. ( NOTE: Angle brace shown on outside to better show angle, NORMALLY mounted to inside ).
Includes: 1ea. 40" Brace Bar, 1ea. Pipe Mount Bracket & 2 ea. Dock Mounting Bars, w/ All Fasteners.
( CLICK ON DETAILS FOR DETAILED PRODUCT DESCRIPTION and MORE PICTURES )
NOTE:!! D-630-80; MUST ORDER MINIMUM OF 2 EA. FOR ORDER TO PROCEED. SORRY, BUT NEW SHIPPING COST ON THIS OVERLENGTH ITEM PUSHED US TO IMPLEMENT THIS NEW MINIMUM ORDER POLICY.!!
D-630-80; "Dock Stabilizer Kit" NOTE: This is NOT for 4' wide docks!! It is for docks WIDER then 4 ft. & up to 6 ft. (72”) wide, with 1-1/4" dock pipe ( 1-5/8" O.D.). Stabilizer bar helps to reduce a docks side to side racking/swaying. U-shaped design mounting brackets allow brackets to be mounted on dock pipes already fastened to dock. ( DOES NOT need to be slid over from the top of the pipe ).
Includes: 1ea. 80" Brace Bar, 2ea. End Mount Brackets & Fasteners.
( CLICK ON DETAILS FOR DETAILED PRODUCT DISCRIPTION and MORE PICTURES )
NOTE:!! D-630; MUST ORDER MINIMUM OF 2 EA. FOR ORDER TO PROCEED. SORRY, BUT NEW SHIPPING COST ON THIS OVERLENGTH ITEM PUSHED US TO IMPLEMENT THIS NEW MINIMUM ORDER POLICY.!!
D-630; "Dock Stabilizer Kit" for 3 ft. (36”) to 4 ft. (48”) wide docks with 1-1/4" dock pipe ( 1-5/8" O.D.). Stabilizer bar helps to reduce a docks side to side racking/swaying. U-shaped design mounting brackets allow brackets to be mounted on dock pipes already fastened to dock. ( DOES NOT need to be slid over from the top of the pipe ).
Includes: 1ea. 53" Brace Bar, 2ea. End Mount Brackets & Fasteners.
( CLICK ON DETAILS FOR DETAILED PRODUCT DESCRIPTION and MORE PICTURES )
D-631; "1 Pr. Stabilizer Pipe Clamps", (For 1-1/4" Pipe, (1-5/8 O.D.)) are used to mount your stabilizer pipe, angle or bar. U-shaped design allows bracket to be mounted on dock pipes already fastened to dock. (DOES NOT need to be slid over from the top of the pipe).
NOTE: THIS ITEM SUBECT TO $14.50 MINIMUM SHIPPING CHARGE. IF TOTAL ORDER SHIPPING CHARGES DO NOT ACHIEVE MINUMUM.