Roller Guide-Ons, T-930; 3-Way Adjustable ( 1 PAIR )

Boat Trailer Roller Guide-Ons, T-930; 3-Way Adjustable; 1 PAIR ( 1 ea. shown ) has a 13” overall length roller assembly that adjusts up & down 28” to 40” high, and has 5 possible angle positions 0 to 20 degrees (in 5 degree increments) to fit your boat. The inside of the roller assembly can adjust out to 15” on 3" wide frames and 16" on 2" wide frames on each side of trailer frame. Gold Zinc plated for added protection against corrosion. Packaged one pair per carton with all mounting hardware for trailer frames up to 3”W x 4-1/4”H.

"HOT DIPPED GALVANIZED FINISH", NOW AVAILABLE !! Choose "GALVANIZED FINISH" option below.

 "NOTE !! The standard Gold Zinc Finish can be painted to match your trailer color if wanted. Check out this youtube link, were a customer made a great video while painting a Ve-Ve Inc. T-945; 47" Post Guide On, complete w/ music     https://www.youtube.com/watch?v=SUxtFxpgaOM. 

For frames up to 5-1/4" high check option T-7-8 below for longer bolts.

For frames up to 6-1/4" high check option T-8-8 below for longer bolts.

NOTE: When mounting "Guide-On's" on trailers with steps behind the fender, the 2 outside holes may be drilled through the step next to the frame for the mounting bolts to go through to the bottom clamp plate.

NOTE: I-Beam trailers. Our clamps work on I-Beams UP TO 3" WIDE. For I-Beams that are 3-1/2" wide, call 763-427-5330 to have special clamps ( outside holes are slotted to mount to a 3-1/2" wide I-Beam ) packaged instead of standard clamps. PLEASE, ONLY ask for this by phone call, NOT by making a note on order. Also, ONLY ask for this if needed, you DO NOT want the slotted clamps on 3" wide frames. Also, if your I-Beam is WIDER then 3-1/2" you can mount with the standard clamps by drilling holes through the top & bottom inside flange legs of I-Beam to allow the bolts to pass down to the bottom clamp plate, this will NOT hurt the strength of the frame.

Plus $0 per pair shipping

Options: T-7-8; 8 ea. 7" bolts for frames up to 5-1/4" high.

Options: T-8-8; 8 ea. 8" bolts for frames up to 6-1/4" high.