- per page
The BRA-15-4; is a 4' long Aluminum "Extra Section" for the DDA-2017, DDA-2000 Boat Ramps & the DDA-PW10, DDA-PW17 Personal Water Craft Ramps. Extra section easily adds on to ramp. ( Comes with section connecter plates & fasteners not shown. )
NOTE: TO VIEW PHOTO ENLARGEMENT AND MORE PRODUCT INFORMATION, CLICK ON IMAGE OR DETAILS.
The BRA-15; is a 8' long Aluminum "Extra Section" for the DDA-2017, DDA-2000 Boat Ramps & the DDA-PW10, DDA-PW17 Personal Water Craft Ramps. Extra section easily adds on to ramp. ( Comes with section connecter plates & fasteners not shown. )
NOTE: TO VIEW PHOTO ENLARGEMENT AND MORE PRODUCT INFORMATION, CLICK ON IMAGE OR DETAILS.
The Boat Ramp "Support Kit"; 1 pr. pipe clamps ( For 1-1/4" Pipe ( 1-5/8" O.D Pipe ) that mount to "Boat Ramp" side tubes & 1 pr. of 8" square Base Pads ( For 1-1/4" Pipe ( 1-5/8" O.D Pipe ) (NO pipe included). Hole in center of Base Pad allows pipe to go threw for extra Boat Ramp support if desired. Galvanized finish. Sold as a pair.
NOTE: TO VIEW PHOTO ENLARGEMENT AND MORE PRODUCT INFORMATION, CLICK ON IMAGE OR DETAILS.
The Boat Ramp "Anchoring Kit" (2ea. 1-1/4” x 31" long pipe, 2ea. augers, brackets and mounting fastener). For all Boat Ramps
NOTE: TO VIEW PHOTO ENLARGEMENT AND MORE PRODUCT INFORMATION, CLICK ON IMAGE OR DETAILS.
Electric winch "Mounting Plate". Fits 2” wide winch post, and comes with all mounting fasteners. (NO winch).
NOTE: TO VIEW PHOTO ENLARGEMENT AND MORE PRODUCT INFORMATION, CLICK ON IMAGE OR DETAILS.
Mounting Tube for VE-VE “Guide-Ons” use on Boat Ramps. Accessory Mounting tube can be used to mount Post, Roller or Bunk style Guide Ons. Shown with optional T-945-G; 47" Galvanized "Post Guide Ons". The BR-28 is shown mounted on a Boat Ramp.
NOTE: TO VIEW PHOTO ENLARGEMENT AND MORE PRODUCT INFORMATION, CLICK ON IMAGE OR DETAILS.
"Section Disconnect Kit" for aluminum 2000# or DDA-PW10 model Boat Ramps. ( Boat Ramps with roller bunks. )
NOTE: TO VIEW PHOTO ENLARGEMENT AND MORE PRODUCT INFORMATION, CLICK ON IMAGE OR DETAILS.
The BR-58; "Installation Wheels Kit" consist of 2 (24" Dia.) wheels, 1 Axle, 2 Axle Mt. Brkt's. and all mounting hardware. Kit mounts to the side tubes and allows for easy Ramp installation and removal ( NOTE: Wheels MUST be removed from axel after installation & NOT USED to support Boat Ramp with boat on it !! ). NOTE: For 40" wide Boat Ramps ONLY!. The BR-58 is shown mounted on a Boat Ramp.
NOTE: TO VIEW PHOTO ENLARGEMENT AND MORE PRODUCT INFORMATION, CLICK ON IMAGE OR DETAILS.
"Electric Winch" designed especially for Boat Ramps with 90 ft. of 7/32 aircraft cable. Power in, power out, controlled freewheeling clutch, and automatic brake.
NOTE: TO VIEW PHOTO ENLARGEMENT AND MORE PRODUCT INFORMATION, CLICK ON IMAGE OR DETAILS.
BR-90; Installation Tow Hitch. Shown mounted to front of Boat Ramp. Most commonly used in conjunction with BR-58 / BR-59; Installation wheel kit.
NOTE: NOT TO BE USED WITH WATERCRAFT ON RAMP. Ramps longer then 24 ft. long may need 2 ea. Installation wheel Kits so weight of Ramp does not cause damage to Ramp or Tow Hitch.
NOTE: TO VIEW PHOTO ENLARGEMENT AND MORE PRODUCT INFORMATION, CLICK ON IMAGE OR DETAILS.
T-992-16; "BOW STOP ROLLER ASSEMBLY." ( For 2" Wide Winch Post ). Comes with 3" wide Bow Roller with End Bell Roller Caps, Mt. Brkts. & Fasteners. Mounts on to 2" Sq. & 2" wide x 3" Winch Post. Note: Rollers are actually BLUE, not black as shown.
"HOT DIPPED GALVANIZED FINISH" available ( mainly for SALT WATER !! ), Click on "DETAILS" for option.
NOTE: TO VIEW PHOTO ENLARGEMENT AND MORE PRODUCT INFORMATION, CLICK ON IMAGE OR DETAILS.
BRA-15-SS; "Starter Section". 8' Section that has 3 ea. Cross Tubes with Keel Rollers. Each cross tube also has a pair of Roller Bunk Support Rods that support the 8' Roller Bunks. Use with 1 or more BRA-15; 8' Extra Section to make a 2000# Boat Roller Ramp system with out a Winch Section.
NOTE: Picture shown is standard BRA-15. The BRA-15-SS would have the additional cross tube w/ keel roller and 2 ea. roller tube support rod assemblies that would complete the end of section.
Aluminum "Cross Tube" with keel roller and mounting fasteners for all 40" wide ALUMINUM Boat Ramps. ( NOTE: Actual cross tube is 36" wide ).
NOTE: TO VIEW PHOTO ENLARGEMENT AND MORE PRODUCT INFORMATION, CLICK ON IMAGE OR DETAILS.
BR-20-1A; 1 Ea. Pipe Mount Bracket with 2 ea. U-bolts & nuts. ( For 1-1/4" Pipe ). Used on the BR-20; Support kit & BR-26; Anchor Kit.
- per page
