Home :: POST Dock Brackets ( #5 ) :: ( #3 ) "POST DOCK BRACKETS" For 2" dock pipe ( 2-3/8" O.D. ).

( #3 ) "POST DOCK BRACKETS" For 2" dock pipe ( 2-3/8" O.D. ).

DOCK BRACKETS, DOCK HARDWARE, DOCK ACCESSORIES & DOCK PARTS

D-500 Series; "POST DOCK BRACKETS" For 2" dock pipe ( 2-3/8" O.D. ).pipe.

NOTE !! Dock hardware sizes refer to the pipes INSIDE diameter. 1-1/4”, 1-1/2” and 2” schedule 40 or 80 pipe, Have OUTSIDE dimensions of 1-5/8”, 1-7/8” and 2-3/8” O.D.

"Click" on product picture or "Click on Details" under product picture to go to more detailed product information, product accessories and more photos.

products

Sort by: Product Price Default
  •  per page
D-638-40; "Dock Stabilizer Kit" ( For 2" pipe. ( 2-3/8" O.D.)

D-638-40; "Dock Stabilizer Kit" for docks with  2" dock pipe ( 2-3/8" O.D.).  Side stabilizer bar helps to reduce a docks front to back racking/swaying. U-shapped design pipe mounting bracket allow bracket to be mounted on dock pipes allready fastened to dock. ( NOTE: Angle brace shown on outside to better show angle, NORMALLY mounted to inside ).

Includes: 1ea. 40" Brace Bar, 1ea. Pipe Mount Bracket & 2 ea. Dock Mounting Bars, w/ All Fasteners.

( CLICK ON DETAILS FOR DETAILED PRODUCT DESCRIPTION and MORE PICTURES )

Sign in to rate
Our price: $34.45
Quantity



D-638-80; "Dock Stabilizer Kit", ( For 2" pipe. ( 2-3/8" O.D. ))

D-638-80; "Dock Stabilizer Kit"NOTE: This is NOT for 4' wide docks!! It is for docks WIDER then 4 ft.  & up to 6 ft. (72”) wide, with 2" dock pipe ( 2-3/8" O.D.). Stabilizer bar helps to reduce a docks side to side racking/swaying. U-shapped design mounting brackets allow brackets to be mounted on dock pipes allready fastened to dock. ( DOES NOT need to be slid over from the top of the pipe ).

Includes: 1ea. 80" Brace Bar, 2ea. End Mount Brackets & Fasteners.

( CLICK ON DETAILS FOR DETAILED PRODUCT DISCRIPTION and MORE PICTURES )

Sign in to rate
Our price: $51.45
Quantity



D-638; "Dock Stabilizer Kit", ( For 2" pipe. ( 2-3/8" O.D. ))

D-638; "Dock Stabilizer Kit", for 3 ft. (36”) to 4 ft. (48”) wide docks with 2" dock pipe ( 2-3/8" O.D.). Stabilizer bar helps to reduce a docks side to side racking/swaying. U-shapped design mounting brackets allow brackets to be mounted on dock pipes allready fastened to dock. ( DOES NOT need to be slid over from the top of the pipe ).

Includes: 1ea. 53" Brace Bar, 2ea. End Mount Brackets & Fasteners.

( CLICK ON DETAILS FOR DETAILED PRODUCT DISCRIPTION and MORE PICTURES )

Sign in to rate
Our price: $41.45
Quantity



D-593; "Pipe Driving Cap" ( For 1-1/4", 1-1/2" & 2" pipe ).

"Pipe Driving Cap" helps protect top of pipe when driving pipe into lake bottom. Cap fits over 1-1/4" Pipe (1-5/8" O.D.), 1-1/2" Pipe (1-7/8" O.D.) & 2" Pipe (2-3/8" O.D.). Hole provided to tie optional retrieving rope and place other end over pipe. NOTE: THIS ITEM SUBECT TO $14.50 MINIMUM SHIPPING CHARGE. IF TOTAL ORDER SHIPPING CHARGES DO NOT ACHIEVE MINUMUM.

( CLICK ON DETAILS FOR DETAILED PRODUCT DISCRIPTION )

Sign in to rate
Our price: $16.45
Quantity



D-56; "Pipe Cap" ( For 2" pipe. ( 2-3/8" O.D. )).

The "Pipe Cap" fits over 2" dock pipe that is 2-3/8" O.D. These round injection molded pipe caps are made with marine grade vinyl and fit snugly over the top of the pipe for a safe and attractive finish.

NOTE: BECAUSE OF LOW INVENTORY AT THIS TIME, PIPE CAPS WILL ONLY BE SOLD ALONG WITH A DOCK BRACKET ORDER, SORRY!!

Shipping is FREE when ordered with a dock bracket order!!!!

Sign in to rate
Our price: $2.50
Quantity



D-563; "Dock Fastener Kit ( Bulk Pkg. )"

"DOCK FASTENER KIT (Bulk Pkg.)"

  • (100 ea.) 3/8”-16 x 2-1/2”; Galvanized Carriage Bolts.
  • (100 ea.) 3/8”-16; Galvanized Hex Nuts.
  • (100 ea.) 3/8”; Galvanized Washers.

     

Sign in to rate
Our price: $49.50
Quantity



D-561; "Dock Fastener Kit"

"FASTENER KIT"

  • (4 ea.) 3/8”-16 x 2-1/2”; Galvanized Carriage Bolts.
  • (4 ea.) 3/8”-16; Galvanized Hex Nuts.
  • (4 ea.) 3/8”; Galvanized Washers.

     

Sign in to rate
Our price: $2.30
Quantity



D-595; "Dock Pipe, Sand Auger Wrench."

Use "Dock Pipe Wrench" to screw in & out dock pipe with "Pipe Augers" mounted to them from lake/river bottom, or in some cases, to pull out dock pipe W/out Augers.

NOTE: "Auger Wrench" works on 1-1/4", 1-1/2" & 2" Dock Pipe.

( CLICK ON DETAILS FOR DETAILED PRODUCT DISCRIPTION )

Sign in to rate
Our price: $67.45
Quantity



D-506; "Sand Auger" ( For 2" pipe. ( 2-3/8" O.D. )).

The D-506; "Sand Auger" ( For 2" Sch. 40 Pipe, ( 2-1/16" Inside diameter )), mounts in the inside of the dock pipe and stabilizes it firmly to the lake bottom for added dock stability and support. These are not the lightweight / breakable Aluminum ones, these are made of Solid Cast Iron, weighing over 4 lbs. each.

NOTE: THIS ITEM SUBJECT TO A MINIMUM SHIPPING CHARGE. IF TOTAL ORDER SHIPPING CHARGES DO NOT ACHIEVE MINIMUM.

( CLICK ON DETAILS FOR DETAILED PRODUCT DISCRIPTION & INFO. ON AUGER SCREWING WRENCH )

Sign in to rate
Our price: $18.95
Quantity



D-548; 2' "Bumper Mount" ( For 2" pipe. ( 2-3/8" O.D. )).

THIS ITEM IS OUT OF STOCK UNTIL FURTHER NOTICE, SORRY!!

2' "Bumper Mounts" are made to slip over the top of your existing ( 2" ) dock posts and mount a Carpeted Wood or Polyethylene Bumper.

NOTE: Shown with optional D-542; "Polyethylene Bumper", bumper pictured below.

Sign in to rate
Our price: $43.95
Quantity



D-562; "Rectangular Backing Plate".(1)

The D-562; "Rectangular Backing Plate" can be used with the D-550-L, D-555-L & D-556-L "Straight Brkt., Section Connectors" as a back up plate on inside of dock section to add more bracket mounting support ( 2 ea. per bracket ).

( CLICK ON DETAILS FOR DETAILED PRODUCT DISCRIPTION )

Sign in to rate
Our price: $1.85
Quantity



D-556-L; "Straight Bracket / Section Connector" ( For 2" Pipe. ( 2-3/8" O.D.)).

The "Straight Brkt. / Section Conn." has a angle iron dock mount with adj. sleeve for fastening 2" pipe to dock. Usually used 2 ea. per connection joint for dock support and connecting dock sections together ( 1/2" adj. bolt included ).

( CLICK DETAILS FOR DETAILED PRODUCT INFO. )

Sign in to rate
Our price: $23.95
Quantity



D-526; 12" Sq. "Base Pad" ( For 2" pipe. ( 2-3/8" O.D. )).

The "Base Pad" has a 12" square base and adjustable sleeve to mount 2" Pipe ( 1/2" adjustment bolt included ). Hole in center of pad allows pipe to go through for extra dock support if desired. Usually used 2-4 ea. per dock section.

( CLICK ON DETAILS FOR DETAILED PRODUCT DISCRIPTION; PIPE CAPS AND FASTENERS )

Sign in to rate
Our price: $27.45
Quantity



D-562; "Rectangular Backing Plate".(2)

The D-562; "Rectangular Backing Plate" can be used with the D-560 & D-565 "O.S. Corner Brackets" as a back up plate on inside of dock section or the D-566; "I.S. Corner Bracket on the outside of dock to add more bracket mounting support. ( 2 ea. per Bracket ).

( CLICK ON DETAILS FOR DETAILED PRODUCT DISCRIPTION )

Sign in to rate
Our price: $1.85
Quantity



  •  per page