- per page
To order or look at Bumper Brackets & Bumpers. "CLICK HERE" For a direct link.
To order or look at Dock Bumpers. "CLICK HERE" For a direct link.
The price for this product is not set. You can decide how much you want to pay.
The D-562; "Rectangular Backing Plate" can be used with the D-550-L, D-555-L & D-556-L "Straight Brkt., Section Connectors" as a back up plate on inside of dock section to add more bracket mounting support ( 2 ea. per bracket ).
( CLICK ON DETAILS FOR DETAILED PRODUCT DISCRIPTION )
The D-562; "Rectangular Backing Plate" can be used with the D-570, D-575, D-580 & D-585, "O.S. Corner Brackets" as a back up plate on inside of dock section or the D-576 & D-586; "I.S. Corn. Brkts. on the outside of dock to add more bracket mounting support.
( CLICK ON DETAILS FOR DETAILED PRODUCT DISCRIPTION )
"Rectangular Backing Plate" can be used with the D-550 & D-555; "Straight Brackets" or the D-450 & D-452; "Floating Straight Brackets" as a back up plate on inside of dock section to add more bracket mounting support.
NOTE: NOT for D-550-L, D-555-L or D-556-L. USE D-562; "Rect. Backing Plate" for them!!
( CLICK ON DETAILS FOR DETAILED PRODUCT DISCRIPTION )
The "Pipe Cap" fits over 1-1/4" dock pipe that is 1-5/8" O.D. These round injection molded pipe caps are made with marine grade vinyl and fit snugly over the top of the pipe for a safe and attractive finish. ( Color is White ).
NOTE: BECAUSE OF LOW INVENTORY AT THIS TIME, PIPE CAPS WILL ONLY BE SOLD ALONG WITH A DOCK BRACKET ORDER, SORRY!!Shipping is FREE when ordered with a dock bracket order!!!
"Rectangular Backing Plate" can be used with the D-510 & D-515; "Hook & Eye Brackets" or the D-475; "Chain Retainer" as a back up plate on inside of dock section. Made of 3" W. x 5" L. x 12 ga. Th. galvanized sheet metal.
( CLICK ON DETAILS FOR DETAILED PRODUCT DISCRIPTION )
"FASTENER KIT"
- (4 ea.) 5/16”-18 x 2-1/2”; Galvanized Carriage Bolts.
- (4 ea.) 5/16”-18; Galvanized Hex Nuts.
-
(4 ea.) 5/16”; Galvanized Washers.
"HOOK" Section Connector Bracket" when used in pairs alone with 2 ea. D-515 "Eye Section Conn. Brkts." will connect 2 ea. dock sections together. Made of 3" x 5" x 3/16" thick material. Sold singly.
( CLICK ON DETAILS FOR DETAILED PRODUCT DISCRIPTION; PIPE CAPS AND FASTENERS )
"EYE" Section Connector Bracket" when used in pairs alone with 2 ea. D-510 "Hook Section Conn. Brkts." will connect 2 ea. dock sections together. Made of 3" x 5" x 3/16" thick material. Sold singly.
( CLICK ON DETAILS FOR DETAILED PRODUCT DISCRIPTION; PIPE CAPS AND FASTENERS )
The "Straight Bracket" has a angle iron dock mount with an adj. sleeve for fastening 1-1/4" dock pipe to side of dock section. Usually used 2 ea. per dock section. ( 1/2" adjustment bolt included ).
( CLICK DETAILS FOR DETAILED PRODUCT DISC., PIPE CAPS AND FASTENERS )
THIS ITEM IS OUT OF STOCK.
,"Pipe Driving Cap" helps protect top of pipe when driving pipe into lake bottom. Cap fits over 1-1/4" Pipe (1-5/8" O.D.), 1-1/2" Pipe (1-7/8" O.D.) & 2" Pipe (2-3/8" O.D.). Hole provided to tie optional retrieving rope and place other end over pipe. NOTE: THIS ITEM SUBECT TO $14.50 MINIMUM SHIPPING CHARGE. IF TOTAL ORDER SHIPPING CHARGES DO NOT ACHIEVE MINUMUM.
( CLICK ON DETAILS FOR DETAILED PRODUCT DISCRIPTION )
The D-504; "Sand Auger" ( For 1-1/4" Sch. 40 Pipe, ( 1-3/8" Inside diameter )), mounts in the inside of the dock pipe and stabilizes it firmly to the lake bottom for added dock stability and support. These are not the lightweight / breakable Aluminum ones, these are made of Solid Cast Iron, weighing 3-1/4 lbs. each.
NOTE: THIS ITEM SUBJECT TO A MINIMUM SHIPPING CHARGE. IF TOTAL ORDER SHIPPING CHARGES DO NOT ACHIEVE MINIMUM.
( CLICK ON DETAILS FOR DETAILED PRODUCT DISCRIPTION, SIZE & INFO. ALSO ON AUGER SCREWING WRENCH )
The "Base Pad" has a 8” square base and adjustable sleeve to mount 1-1/4" Pipe. ( 1/2" adjustment bolt included ). Hole in center of pad allows pipe to go through for extra dock support if desired. Usually used 2 ea. per dock section.
( CLICK ON DETAILS FOR DETAILED PRODUCT DESCRIPTION AND PIPE CAPS )
The "Straight Brkt. / Section Conn." has a angle iron dock mount with adj. sleeve for fastening 1-1/4" pipe to dock. Usually used 2 ea. per connection joint for dock support and connecting dock sections together ( 1/2" adj. bolt included ).
( CLICK DETAILS FOR DETAILED PRODUCT INFO. )
- per page