- per page
NOTE: D-400 brackets do NOT line up ( hole match up ) with D3-400 brackets.
D-435 "Inside Corner Support" can be used with the D-430 and D-440.
( CLICK ON DETAILS FOR DETAILED PRODUCT DISCRIPTION; PIPE CAPS AND FASTENERS )
NOTE: D-400 brackets do NOT line up ( hole match up ) with D3-400 brackets.
"Outside Corner Angle Tie" can be used with D-435; "Inside Corner Support" or when a float is in the way the D-483: "Backing Plate" may be used.
( CLICK ON DETAILS FOR DETAILED PRODUCT DISCRIPTION; PIPE CAPS AND FASTENERS )
"Floating Straight Bracket" works with dock pipe UP TO 2" ( 2-3/8" O.D. ) to stabilize floating docks or use bracket as a tie off for anchoring floating docks or swim rafts.
( CLICK ON DETAILS FOR DETAILED PRODUCT DISCRIPTION; PIPE CAPS AND FASTENERS )
"Dock Ramp Hinge Kit" is used for the first dock section ( RAMP ) when the shore level is higher or lower than the main dock. Kit includes 4 ea. plates and mounting fasteners.
( CLICK ON DETAILS FOR DETAILED PRODUCT DISCRIPTION; PIPE CAPS AND FASTENERS )
The "45 Degree Corner Brackets" are used to attach and stabilize a 45 degree inside corner dock section to your dock or to mount a 2" x 4"/6" inside corner brace.
( CLICK ON DETAILS FOR DETAILED PRODUCT DISCRIPTION; PIPE CAPS AND FASTENERS )
"Section Tie Plates" are used to connect 2 ea. dock sections together. Use 2 ea. PER SIDE if sections are open ended, use 1 ea. with 2 ea. D-435; "Inside Corner Supports" or 2 ea. D-442; "Square Backing Plates" PER SIDE if secton ends are closed.
( CLICK ON DETAILS FOR DETAILED PRODUCT DISCRIPTION AND FASTENERS )
The "Backing Plate" can be used with the D-445; "45 Degree Corner Bracket" or the D-485; "Section Tie Plate" as a back up plate on inside of dock section. Made of 3" W. x 4" L. x 12 ga. Th. galvanized sheet metal.
( CLICK ON DETAILS FOR DETAILED PRODUCT DISCRIPTION )
"Chain Retainer" bolts to side of dock to fasten / mount chain that is connected at other end to a submerged weight that holds dock in place.
( CLICK ON DETAILS FOR DETAILED PRODUCT DISCRIPTION; PIPE CAPS AND FASTENERS )
"Cement Anchor Cleats" are cemented into a 5 gallon pail or any cement form to make an anchor used to attach to and stabilize Flooting Docks that do not have guide pipes. Price is for 4 ea. pc's.
( CLICK ON DETAILS FOR DETAILED PRODUCT DISCRIPTION )
"FASTENER KIT"
- (4 ea.) 5/16”-18 x 2-1/2”; Galvanized Carriage Bolts.
- (4 ea.) 5/16”-18; Galvanized Hex Nuts.
-
(4 ea.) 5/16”; Galvanized Washers.
"DOCK FASTENER KIT (Bulk Pkg.)"
- (100 ea.) 5/16”-18 x 2-1/2”; Galvanized Carriage Bolts.
- (100 ea.) 5/16”-18; Galvanized Hex Nuts.
-
(100 ea.) 5/16”; Galvanized Washers.
THIS ITEM IS OUT OF STOCK.
,"Pipe Driving Cap" helps protect top of pipe when driving pipe into lake bottom. Cap fits over 1-1/4" Pipe (1-5/8" O.D.), 1-1/2" Pipe (1-7/8" O.D.) & 2" Pipe (2-3/8" O.D.). Hole provided to tie optional retrieving rope and place other end over pipe. NOTE: THIS ITEM SUBECT TO $14.50 MINIMUM SHIPPING CHARGE. IF TOTAL ORDER SHIPPING CHARGES DO NOT ACHIEVE MINUMUM.
( CLICK ON DETAILS FOR DETAILED PRODUCT DISCRIPTION )
The "Pipe Cap" fits over 1-1/2" dock pipe that is 1-7/8" O.D. These round injection molded pipe caps are made with marine grade vinyl and fit snugly over the top of the pipe for a safe and attractive finish. ( Color is GRAY ).
NOTE: BECAUSE OF LOW INVENTORY AT THIS TIME, PIPE CAPS WILL ONLY BE SOLD ALONG WITH A DOCK BRACKET ORDER, SORRY!!
Shipping is FREE when ordered with a dock bracket order!!!
THE D-56; 2" PIPE CAPS ARE CURRENTLY OUT OF STOCK.
,
The "Pipe Cap" fits over 2" dock pipe that is 2-3/8" O.D. These round injection molded pipe caps are made with marine grade vinyl and fit snugly over the top of the pipe for a safe and attractive finish.
NOTE: BECAUSE OF LOW INVENTORY AT THIS TIME, PIPE CAPS WILL ONLY BE SOLD ALONG WITH A DOCK BRACKET ORDER, SORRY!!
Shipping is FREE when ordered with a dock bracket order!!!!
- per page
