Home :: Boat Trailer Accessories ( #2 ) :: ( #2 ) Bunk Guide-Ons :: Bunk Guide-Ons, T-918; 18" long, Single Post ( 1 PAIR )

Bunk Guide-Ons, T-918; 18" long, Single Post ( 1 PAIR )

Bunk Guide-Ons, T-918; 18" long, Single Post ( 1 PAIR )
Bunk Guide-Ons, T-918; 18 inches long, Single Post, Image Bunk Guide-Ons, T-918; 18 inches long, Single Post, Drawing Bunk Guide-Ons, T-918; 18 inches long, Single Post, ( Close-Up ) Clamp Assembly Close-Up

Boat Trailer Bunk Guide-Ons, T-918; 18" Carpeted Bunks, Single Post model, 1 PAIR (1ea. shown). This model consist of 18" carpeted bunks mounted on 1-1/2" square steel tube bunk arms formed at 96 degrees ( 6 degrees out past 90 degrees ) that help center and load 14 to 16 foot boats in wind or side current conditions. The inside of bunks extend out to 9-1/2" on 3" wide frames or 10-1/2" on 2" wide frames, from each side of trailer frame and have height adjustment of 19" to 25". Gold Zinc plated finish for added protection against corrosion. Packaged in pairs with all mounting hardware for trailer frames up to 3"W x 4-1/4"H.

"HOT DIPPED GALVANIZED FINISH", NOW AVAILABLE !! Choose "GALVANIZED FINISH" option below. 

For frames up to 5-1/4" high check option T-7-8 below for longer bolts.

For frames up to 6-1/4" high check option T-8-8 below for longer bolts.

NOTE: When mounting "Guide-On's" on trailers with steps behind the fender, the 2 outside holes may be drilled through the step next to the frame for the mounting bolts to go through to the bottom clamp plate.

NOTE: I-Beam trailers. Our clamps work on I-Beams UP TO 3" WIDE. For I-Beams that are 3-1/2" wide, call 763-427-5330 to have special clamps ( outside holes are slotted to mount to a 3-1/2" wide I-Beam ) packaged instead of standard clamps. PLEASE, ONLY ask for this by phone call, NOT by making a note on order. Also, ONLY ask for this if needed, you DO NOT want the slotted clamps on 3" wide frames. Also, if your I-Beam is WIDER then 3-1/2" you can mount with the standard clamps by drilling holes through the top & bottom inside flange legs of I-Beam to allow the bolts to pass down to the bottom clamp plate, this will NOT hurt the strength of the frame.

Plus $0 per pair shipping

Options: T-7-8; 8 ea. 7" bolts for frames up to 5-1/4" high.

Options: T-8-8; 8 ea. 8" bolts for frames up to 6-1/4" high.

Details
SKU T-918
 
Our price: $114.95
Options
T-918-G; "GALVANIZED FINISH".
T-7-8: 8ea. 7" bolts for frames up to 5-1/4" high.
T-8-8; 8 ea. 8" bolts for frames up to 6-1/4" high.
Quantity
: *
: *
: *
Type the characters you see in the picture:


*

Customers' rating

Sign in to rate

Customer's Reviews

There have been no reviews for this product.

Add your review here

: *
: *
Type the characters you see in the picture:


*