Home :: Boat Roller Ramps ( #1 ) :: ( #1 ) Boat Ramps :: Boat Roller Ramp, DDA-2017; ( 2000 pound capacity, 16 ft. long )

Boat Roller Ramp, DDA-2017; ( 2000 pound capacity, 16 ft. long )

Boat Roller Ramp, DDA-2017; ( 2000 pound capacity, 16 ft. long )
Boat Roller Ramp, DDA-2017; ( 2000 pound capacity, 17 ft. long ), Photo Stiffener Plate & Roller Tube (Close Up) End "Keel Cross Tube" (Close Up) Boat Roller Ramp, DDA-2017; ( 2000 pound capacity, 17 ft. long ), Drawing

Boat Roller Ramp, DDA-2017; ( 2000 pound capacity, 16 ft. long ) model features 2" Sq. Aluminum tubular construction & 1" x 2" Aluminum Roller Tubes, with a maximum load capacity of 2,000 lbs. for medium size O/B and light I/O boats. Standard ramp length is 16’ and 40” wide, 1 ea. 8’ winch section, 1 ea. 8’ Roller section and 4 Cross Tubes with Keel Rollers. 1 pr. of bunks with 36 ea. Rollers have fully adjustable positions - Horizontal, Tilt & Vertical - to fit most boat hulls. Features a manual winch on a triangular winch stand. All fasteners & small steel assembly parts are Stainless Steel or Galvanized for extra corrosion protection, especially in salt water. 4' or 8’ extra sections can easily be added to Boat Roller Ramps, along with other accessories listed below.

NOTE:  CLICK ON "View detailed images" to left, to see large Photo Pictures.

NOTE: Proper Boat Ramp installation requires ramp to be supported at both ends and each section connecting joint ( At a minimum ) on 1000# models and every 4 feet ( Preferably by all cross tubes ) on 2000# models. This can be done by leveling the ground, useing concrete blocks, wood timbers etc. or purchasing BR-20 Support Kits. Also the BR-26 Anchoring Kit is an added plus in anchoring ramp to the ground and gives added stability to Boat Ramp. Check out the other Boat Ramp accessories, from electric winches to Boat Ramp "Guide Ons", all intended to enhance your Boat Ramp product.

PRODUCT WEIGHT: 150 LBS.

Shipping Charge: $90.00 per DDA-2017.

"TO VIEW ACCESSORIES PHOTOS" ( CLICK HERE ) and got to "ACCESSORIES DETAILS & ORDER PAGE" 

  • BRA-15-4; 4' Aluminum Extra Section for DDA-2017 & DDA-2000.

  • BRA-15; 8' Aluminum Extra Section for DDA-2017 & DDA-2000.

  • BR-20; Support Kit (1 pr. 1-1/4” pipe clamps & 1 pr 1-1/4: base pads (no pipe included).

  • BR-26; Anchoring Kit (2ea. 1-1/4” x 3’ long pipe, 2 augers and brackets and mounting fastener).

  • BR-27; Electric winch Mounting Plate. Fits 2” wide winch post, with fastener (no winch).

  • BR-28; Mounting Tube for VE-VE "Guide On's". To View product picture and info. ( CLICK HERE )

  • BRA-54; Section Disconnect kit. Easily disconnects section/sections in or close to water for off season were water may freeze.

  • BR-58; Boat Ramp Installation Wheel Kit. ( 2 ea. 24" dia. wheels, 1 ea. axle, 2 ea. axle mt. brkts. and all mounting hrdw. )

  • BRA-60; Aluminum Cross Tube Assembly with keel roller for DDA-2017 & DDA-2000.

  • BR-358; Electric Winch.

Shipping charges listed on accessories are only effective if item/items are ordered with a Ramp.  Shipping charge doubles if item/items are ordered without a ramp purchase.

Contact VE-VE inc. with any further questions etc. at (763) 427-5330 or Email

Details
SKU DDA-2017
 
Our price: $1,295.00
Options
Quantity
: *
: *
: *
Type the characters you see in the picture:


*

Customers' rating

Sign in to rate

Customer's Reviews

There have been no reviews for this product.

Add your review here

: *
: *
Type the characters you see in the picture:


*