Pontoon Boat Roller Ramp has Aluminum tubular construction, with max load capacity of 2000 lbs. & not recommended to be more then a 10 degree angle!!!!.
NOTE: shown with 2 options. #1) BRA-34;"Disconnect Kit" & #2) BRA-225; "4 ft. Extra Section"
NOTE: NOT RECOMMENDED FOR SHORT PONTOON BOATS WITH A EXTENDED CENTER TRANSOM MOTOR MOUNT, WERE THE MOTOR IS MOUNTING TO A TRANSOM THAT ACTUALLY EXTENDS OUT PAST THE END OF THE PONTOONS!! NOTICE the pontoon boat in the picture, the transom motor mount is EVEN with the ends of the pontoons!!
TO VIEW MORE PRODUCT INFO. & PICTURES "CLICK ON IMAGE".
SAVE NOW!! REDUCED SHIPPING SPECIAL!! ( In continental U.S. ), Call on CANADIAN order DISCOUNTS.!! NOTE: SHIPPING COST ARE THROUGH THE ROOF, SO A SHIPPING COST IS NEEDED! !! THE LISTED SHIPPING COST IS FAR BELOW WHAT OUR ACTUAL SHIPPING COST ARE. !! WE ARE SORRY, BUT WE CANNOT ABSORB THE FREE SHIPPING ANY MORE. !!
Pontoon Boat Roller Ramp has Aluminum tubular construction, with max load capacity of 2500 lbs. & not recommended to be more then a 10 degree angle!!!!.
NOTE: shown with 2 options. #1) BRA-64;"Disconnect Kit" & #2) BRA-25; "8 ft. Extra Section" (Normal water level dropped below end rollers)
NOTE: NOT RECOMMENDED FOR SHORT PONTOON BOATS WITH A EXTENDED CENTER TRANSOM MOTOR MOUNT, WERE THE MOTOR IS MOUNTING TO A TRANSOM THAT ACTUALLY EXTENDS OUT PAST THE END OF THE PONTOONS!! NOTICE the pontoon boat in the picture, the transom motor mount is EVEN with the ends of the pontoons!!
TO VIEW MORE PRODUCT INFO. & PICTURES "CLICK ON IMAGE".
SAVE NOW!! REDUCED SHIPPING SPECIAL!! ( In continental U.S. ), Call on CANADIAN order DISCOUNTS.!! NOTE: SHIPPING COST ARE THROUGH THE ROOF, SO A SHIPPING COST IS NEEDED! !! THE LISTED SHIPPING COST IS FAR BELOW WHAT OUR ACTUAL SHIPPING COST ARE. !! WE ARE SORRY, BUT WE CANNOT ABSORB THE FREE SHIPPING ANY MORE. !!
Post Guide Pads ( 36" long, for T-945 & T-945-G ) protect boat's gelcoat from contact with PVC tube on Post Guides. Pads are made of Heavy-Duty 600-denier canvis type material, wrapped around a 1/2" thick foam padding for extra protection. This model has a capped top end with sewn-in elastic band on bottom open end.
Click on "DETAILS" for more product Info.
Post Guide Pads ( 36" long, for T-945 & T-945-G ) protect boat's gelcoat from contact with PVC tube on Post Guides. Pads are made of Heavy-Duty 600-denier canvis type material, wrapped around a 1/2" thick foam padding for extra protection. This model has open ends with sewn-in elastic bands FOR POST GUIDE-ONS WITH LIGHTS.
Click on "DETAILS" for more product Info.
Post Guide Pads ( For T-965, T-965-G, BLG-966 & BLG-966-G ( + -XL models ), & cover 48" of the 60" PVC Tube ) protect boat's gelcoat from contact with PVC tube on Post Guides. Pads are made of Heavy-Duty 600-denier canvis type material, wrapped around a 1/2" thick foam padding for extra protection. This model has a capped top end with sewn-in elastic band on bottom open end. ( NOTE: These are NOT for the T-945 & T-945-G Post Guides. These pads are 8" longer then there 40" PVC tubes and will not slide past the welded brace on the steel tube !! ).
Click on "DETAILS" for more product Info.
Post Guide Pads ( For T-965, T-965-G, BLG-966 & BLG-966-G ( + -XL models ), & cover 48" of the 60" PVC Tube ) protect boat's gelcoat from contact with PVC tube on Post Guides. Pads are made of Heavy-Duty 600-denier canvis type material, wrapped around a 1/2" thick foam padding for extra protection. This model has open ends with sewn-in elastic bands FOR POST GUIDE-ONS WITH LIGHTS. ( NOTE: These are NOT for the T-945 & T-945-G Post Guides. These pads are 8" longer then there 40" PVC tubes and will not slide past the welded brace on the steel tube !! ).
Click on "DETAILS" for more product Info.
T-922 (GOLD ZINC FINISH) & T-922-G (GALVANIZED FINISH) ARE OUT OF STOCK.
PONTOON TRAILER, Post Guide-Ons, 22" Tall, mount to trailer frame cross member and mounted to inside of boats pontoons.
"HOT DIPPED GALVANIZED FINISH" available ( mainly for SALT WATER !! ), Click on "DETAILS" for option.
NOTE: Click on details for product Info. and picture mounted on trailer.
SHIPPING ONLY $5.00!!!
T-965-G ( GALVANIZED FINISH ONLY ) IS OUT OF STOCK !
Boat Trailer Post Guide-Ons, T-945-G; 47" tall, 1 PAIR (1 ea. shown). Galvanized finish model, for SALT WATER USE! ( NOTE: GOLD ZINC PLATED MODEL SHOWN. ) Use on boat trailers or boat lifts/hoist.
Click On "DETAILS", Note our features that the others don't have, along with product info. & pictures.
- Steel tube ONLY 6" shorter then PVC tube.
- Welded brace at tube form for strength.
- 14 ga. steel tube, NOT 16 ga.
- PVC tube sets on Ring Base, NOT jam into joint.
- HOT DIPPED GALVANIZED.
SIMPLY PUT, THE BEST!!!!
FREE SHIPPING!!!
Boat Trailer Post Guide-Ons, T-945; 47" tall, 1 PAIR (1 ea. shown). Gold Zinc Plated finish model, for FRESH WATER USE. ( Choose T-945-G, for SALT WATER USE! ). Use on boat trailers or boat lifts/hoist.
Click On "DETAILS", Note our features that the others don't have, along with product info. & pictures.
SIMPLY, THE BEST!!!!
FREE SHIPPING!!!
T-965-G ( GALVANIZED FINISH ONLY ) IS OUT OF STOCK !
Boat Trailer Post Guide-Ons, T-965-G; 65" tall, 1 PAIR (1 ea. shown). Galvanized finish model, for SALT WATER USE! ( NOTE: GOLD ZINC PLATED MODEL SHOWN. ) Use on boat trailers or boat lifts/hoist.
Click On "DETAILS", Note our features that the others don't have, along with product info. & pictures.
- Steel tube ONLY 6" shorter then PVC tube.
- Welded brace at tube form for strength.
- 14 ga. steel tube, NOT 16 ga.
- PVC tube sets on Ring Base, NOT jam into joint.
- HOT DIPPED GALVANIZED.
SIMPLY PUT, THE BEST!!!!
FREE SHIPPING!!!
Boat Trailer Post Guide-Ons, T-965; 65" tall, 1 PAIR (1 ea. shown). Gold Zinc Plated finish model, for FRESH WATER USE. ( Choose T-965-G, for SALT WATER USE! ). Use on boat trailers or boat lifts/hoist.
Click On "DETAILS", Note our features that the others don't have, along with product info. & pictures.
- Steel tube ONLY 6" shorter then PVC tube.
- Welded brace at tube form for strength.
- 14 ga. steel tube, NOT lighter 16 ga.
- PVC tube sets on Ring Base, NOT jam into joint.
SIMPLY, THE BEST!!!!
FREE SHIPPING!!!
Boat Trailer Post Guide-Ons,T-967-G; "HEAVY DUTY" 7-1/2 ft. Tall, are ideal for those larger boats that are to big for any standard Guide-On, on the market. 2-1/2" PVC Tube with 2-1/2" sq. trailer mount tube.
NOTE: To help explain how HEAVY DUTY the T-967-G; "7-1/2' Post Guides" are, they weigh 110 lbs. a pair!
SOLD IN PAIRS. STANDARD FINISH IS "HOT DIPPED GALVANIZED"
Click on "DETAILS" for product Info. & pictures that better show how BIG they actually are!!
Personal Watercraft Ramp, DDA-PW10; 10-1/2 ft. long model has Aluminum sq. tube construction. Ideal for medium PWC units.
TO VIEW MORE PRODUCT INFO. & PICTURES "CLICK ON IMAGE".
NOTE:!! With today's larger / longer 2-3 seater PWC units, an additional BRA-15-4 ( 4' extra section ) may be needed to allow end rollers of Roller Ramp to be under water level & completely bring PWC out of the water. !! Another choice is the DDA-PW-17; 16 ft. PWC Roller Ramp which gives ample length for changing water levels & distance put between end of PWC & water.!!
SAVE NOW!! LIMITED TIME "FREE SHIPPING" SPECIAL!! ( In continental U.S. ), Call on CANADIAN order DISCOUNTS.!! NOTE: TAKE ADVANTAGE NOW ON ORDER, SHIP WHEN YOU WANT.!!
Personal Watercraft Ramp, DDA-PW17; 16 ft. long model has Aluminum tubular construction & accommodates the longer 2-3 seat PWC models on the market.
TO VIEW MORE PRODUCT INFO. & PICTURES "CLICK ON IMAGE".
SAVE NOW!! LIMITED TIME "FREE SHIPPING" SPECIAL!! ( In continental U.S. ), Call on CANADIAN order DISCOUNTS.!! NOTE: TAKE ADVANTAGE NOW ON ORDER, SHIP WHEN YOU WANT.!!
